Suncoat Mesh Treatment Products
Suncoat Chemicals include several products which have been formulated with ever increasing environmental awareness in mind. Ways are continuously being researched into manufacturing products with reduced environmental impact.

Emulsifiable Screenwashes
Suncoat Emulsifiable Screenwashes have been specially formulated for the removal of ink residues prior to the application of stencil strip. These can be used in conjunction with Alkaline Paste or Haze Remover to assist in stain removal

26-04
is a conventional emulsifiable screenwash with excellent solvent power. It should, however be stated that it’s direct discharge to drainage may not be acceptable to the water authorities.

26-041
contains no cyclohexanone and as such is a “cleaner” product, whilst still retaining good solvent power. It should, however be stated that it’s direct discharge to drainage may not be acceptable to the water authorities.

26-053
Machine Emulsifiable Screenwash is a blend of slow evaporating solvents slightly stronger in action than the above, specially designed for use in automatic screen reclaiming machinery. Again, it should be stated that it’s direct discharge to drainage may not be acceptable to the water authorities.
It’s also very useful in removing those oil stains off your concrete drive, but don’t use it on tarmac because it moves that as well!

MGC0700
This Product is a Hazard Label Free emulsifiable screenwash, based on natural products, which is virtually fully biodegradable whilst retaining excellent performance. It contains no VOC’s which makes it more environmentally friendly. It’s acceptability for discharge to drains should be checked with your local authority.

Hydrosolve YC935
A screen cleaning product which is used diluted with water, especially suitable for UV and plastisol inks. It is also Hazard Label free. It has been developed for application by hand and in automatic screen washing units, produces little foam and can be used in combination with Easyclean Concentrated Stencil Stripper to clean and de-coat screens in one operation. It’s acceptability for discharge to drains should be checked with your local authority.

Screentex LTE
A blend of high flashpoint, relatively slow evaporating solvents for the removal of ink residue prior to the application of SunCoat Stencil Strip. This product can be used with SunCoat Haze Remover or SunCoat Alkaprep LC to assist in removing old ink stains and ghost images. It’s acceptability for discharge to drains should be checked with your local authority.

Stencil Removers
Suncoat stencil removers have been formulated to facilitate the decoating of direct, direct/indirect and capillary action photo stencils from all synthetic meshes. The products used suit the preferences if the individual user and, at usage strength are environmentally acceptable, however one should check with the local water authority before discharging to the drains

C22 Diasolve Decoating Powder
is diluted with water at a rate of 100g to 5-10lts.

YC28 Concentrated Strip Liquid
is diluted with water at 1:20, but will often work at dilutions of up to 1:40 ! Very economical to use.

YC14 Diasolve Strip Liquid
A ready to use strip liquid.

YC175 Diasolve Strip Paste
is a ready to use gel which will cling to the mesh whilst working

C165 Gelatine Stencil Remover
For indirect stencils, does exactly what it says on the bottle! An aggressive alkaline hypochiorite solution capable of dissolving gelatine stencils on contact. In addition it also helps remove stubborn ink and pigment stains

Easyclean Stencil Treatment system
Combining the effects of ink removal, stencil removal and degreasing, this new two part product is hazard label free, biodegradeable, VOC –free, and virtually odour free! Furthermore it is actually diluted 50/50 with water before use! Very effective and time saving, a dirty screen from the press room is converted to a clean, de-greased, stencil-ready screen in one operation

Mesh Preparation Products

YC155 Alkaprep Paste
is designed for both the removal of stubborn stains in used screens, and for the degreasing of new screens, and may used with an emulsifiable screenwash as a ghost image or haze remover. As a strong caustic paste it is also useful for stripping paint and varnish from wooden furniture, but please be careful when using and hosing off

C135 Stainaway LV
A low caustic, low viscosity, bleach based stain remover suitable for the removal of UV ink stains, both conventional and water based. It can be applied either by brush or stainless steel coating troughs and may be used in conjunction with emulsifiable screen washes. Best left to dry on the mesh, even in a drying cabinet. Very Good!

Haze Free Liquid
A low odour, single component stain remover designed to remove both ink and diazo staining without the need for post drying.

C1215 Mesh Cleanser
is a mesh preparation product combining efficient de-greasing with uniform wetting of all meshes from coarse to superfine. Essential for enabling even transfer of capillary films, and enhancing the adhesion of film/emulsion and direct systems. Particularly good for removing road haze from the outside of windscreens, just wipe over using cloth moistened with C1215 for a clearer view of the road ahead!

Mesh Prep Liquid
A highly active pre-treatment compound for degreasing polyester, nylon and stainless steel fabrics. It is recommended for use with all types of photo stencil systems.

SunCoat Degreaser Concentrate
A highly active pre-treatment compound for degreasing polyester, nylon and stainless steel fabrics, either by manual application or in automatic reclaiming/cleaning machines.

ULANO MESH TREATMENT PRODUCTS
Stencil Removal Products

No4 Stencil Remover Liquid No4
A ready to use liquid stencil remover for fast and thorough removal of direct emulsions, CDF direct films, and UP3 from all types of fabrics

No5 Stencil Remover Paste
A ready to use paste stencil remover for fast and thorough removal of direct emulsions, CDF direct films, and UP3 from all types of fabrics

Mesh Preparation Products

No3 (ready to use) and No33 (10:1 concentrate) Screen Degreasers
are degreaser solutions which remove dirt, dust and oils from new and used meshes.

No23 Roughening / Degreasing Gel
An abrasive degreaser gel that combines the actions of No2 & No3 products. The abrasion of the mesh promotes better wetting of the fabric and adhesion of stencils of all types.

No25 All Mesh Prep
A ready to use liquid mordant that promotes mesh water retention and thus uniform adhesion of capillary films

STENCIL PRODUCTION
Here are some of the many emulsions available from Suncoat, Murakami and Ulano. There are many more for specialised applications available. Please ask if you have specific requirements

Suncoat Emulsions

PA Emulsion
Suncoat PA emulsion is a diazo sensitised light green emulsion for the production of quality stencils for use with solvent based and non water based UV curing ink systems. It features rapid exposure and good solvent and mechanical wear resistance.

Horizon Emulsion
Suncoat Horizon emulsion is a dual cure product with high solids content, capable of producing stencils of the highest quality. It should be used where high definition and resolution are required. It is suitable for most solvent and UV ink systems including most water based products

YC2535 Dual cure Emulsion
A dual sensitized emulsion capable of producing photo-stencils of an extremely high quality. It should be used where high definition and resolution are required and is recommended for four colour process printing.

2000 Emulsion
Easy to use, high solids content, fast exposing, dual cure emulsion with excellent latitude, edge definition and resolution.

Universal Graphic
A presensitized one component photo-polymer emulsion used for the production of highest quality screen printing stencils.

Vista Plus
A dual cure emulsion capable of product photo-stencils of an extremely high quality, it should be used where high definition and resolution are required and is recommended for four colour process printing.

Murakami Emulsions And Films

Murakami One Pot Sol C2 Emulsion
Murakami One Pot Sol Emulsion is a photopolymer emulsion of high solids content used in the production of stencils of the highest quality. It exhibits excellent definition and is used for four colour halftone and electrographic fine line reproduction.

Murakami One Pot WR Emulsion
One Pot WR is a PVA - SBQ patented pure photopolymer direct emulsion.specially formulated for waterbased ink systems. A similar high specification emulsion to Type C

Murakami MSP-2 Emulsion.
MSP-2 Emulsion is a pre-sensitised one component emulsion for the production of high technology stencils and can be built up to more than 900 microns above the mesh. It is eminently suitable for use in automatic coating machines.

Murakami EXC One-Pot
A single component emulsion with superb reproduction qualities, with resistance to UV, solvent based and water based inks this emulsion is truly universal in its suitability.

Murakami Aquasol TS Emulsion.
This is a one pot photopolymer emulsion for the production of top quality stencils with excellent solvent and water resistance. It should be used for inks and dispersions of water and water / solvent bases. The addition of extra sensitiser will create a virtually permanent stencil for ultra long production runs, but then you’ll need the screen re-stretching! (We can help there!)

Murakami Capillary Films.
Murakami manufacture pure photopolymer capillary and capillary / emulsion films. These are non shrink and reproduce the finest detail. The nature of a capillary film allows precise control of ink deposit ensuring the highest definition. The 20-40 micron films produce the finest detail as demanded by electronic component manufacture. The range of MS Thick-film are used to produce high deposit prints as used in the garment industry for producing 3D plastisol images.

Ulano Films and Emulsions

Ulano Indirect System Films
Ulano indirect films offer superior fine detail reproduction with sharp printing edges, uniform stencil thickness, easy removal, and predictable exposures.
The range of Gelatine based Photographic Films includes

Red TI
A dark red film offering a thick emulsion with exceptional processing latitude, High resolution makes it suitable for fine line and halftone work.

Hi-Fi Green
A thick emulsion on a 5mil matt vynil carrier. Ideal for general printing applications and hides dust, tape marks and positive edges! The thick carrier facilitates the handling of large format stencils.

Super Prep
A green film with wide exposure latitude,. Excellent adhesion to synrhtetic fabrics. For general graphics but not for high resolution work

Pulsar Indirect
Not a gelatine based indirect film, but based on photopolymer chemistry. Pulsar develops in water only, not needing peroxide baths (popular benefit!)
Good resolution, high resistance to non-waterbased inks, Removes easily with ordinary stencil strip liquid. If you are into indirect stencils, you should try this!
If you are a 5* user, this should really interest you!

Ulano Direct Film Capillary Film System
Ulano CDF films are simple to use, adhere and develop with water only, give excellent mesh bridging . The flat bottomed stencils with consistent thickness and sharp shoulders give excellent definition.

CDF
The original conventional diazo sensitised films for use with mild solvent based inks. Not for use with water based inks or inks containing vinyl solvents
Available in a wide range of thicknesses from 10 to 70 micron

CDF/QSR
Fast exposing photopolymer films for use with all solvent based inks. Available in 15 to 40 micron thicknesses.

Ulano Direct Emulsions
Ulano field a veritable armoury of all types of emulsions which would take up pages to describe fully. A selection of these is detailed below but for further information please contact our office.

569
A high solids content diazo emulsion for superb resolution, excellent edge definition, for fine details and halftones. It has complete solvent resistance and is easy to decoat. 569 Fast is a version of 569 requiring half the exposure.

TZ,
A range of diazo emulsions for use with water based inks, water dyes, and plastisols. They produce stencils with excellent definition, good resolution, with good mechanical and water resistance.
TZ/CL Transparent version, TZ/DK Deeper coloured version,
TZ/HY High viscosity version for better bridging on coarse meshes.

995WR
Similar to TZ but with higher solids content.

DLX
A dual cured emulsion of high solids content. Excellent definition and edge sharpness. Suitable for solvent, water based and UV cured inks. Fast exposure and excellent ease of development make this a top quality product

LX660-680-690
These are a range of dual cure emulsions of high to very high solids content. This series gives excellent edge definition and resolution, making these emulsions excellent for fine detail and halftone work.
LX660 is targeted at water based inks, both conventional and UV cured. LX680 and 690 are specifically designed for use with solvent based and conventional UV cured inks.

Proclaim
A diazo-photopolymer (dual-cure) emulsion formulated to provide unequalled exposure latitude and ease of decoating. Its high solids content (37%) provides better stencil build per coat, excellent bridging of coarse mesh, and fast drying. Proclaim has superb coating properties and durability, and is resistant to a wide variety of solvent-based inks, as well as water-based UV. Proclaim is very suitable for general purpose graphics, textile, and industrial applications. Latitude, resolution, and edge definition are excellent, which makes it ideal for fine line and halftone printing.

QFX
is a ready to use one component photopolymer emulsion for fine detail and halftone graphics printing with solvent inks. High solids content gives excellent edge definition and resolution.

Screen Fillers

Suncoat Slow Fry Filler
An excellent economical blue filler with excellent resistance to all solvents. It is easy to apply and bridges all mesh counts with a robust block out with good abrasion resistance. It washes out easily with water.

Suncoat Fast Dry Filler
Fast dry filler leaves a tough flexible film resistant to all solvent based inks. It adheres well to indirect film systems, and removes easily with water.

Unifil Red Filler
A universal filler for solvent and water based ink usage. Removes easily with stencil strip products

Ulano No60 Screen Filler
A water soluble blockout for solvent based inks only. Can be thinned with water for re-touching.

Ulano No10 Extra Heavy Blockout
A thicker water soluble blockout for one coat coverage,
especially useful on coarse meshes. Only for solvent and plastisol based inks.

Emulsion Hardener
Post Hardener
Applied to direct emulsions after development, it hardens and improves durability of water resistant stencils.
(Use of this product to strengthen the stencil, could mean that you have to say goodbye to that mesh! Contact us to have the screen re-stretched!)

Miscellaneous Screen-Making Sundries

Assembly / Montage / Layout Film
We stock this product in rolls of 1.02x25mtr 0.01 mm but roll widths of 1.15 and 1.22 m and lengths of 100m are available to order. We also stock cut sheets where there is a regular use of a particular size. Usually comes in "standard sizes" but can be cut to any size without penalty. Please ask. Cut sheets may be subject to a minimum order, which may be less than you expect.

Coating Troughs
Extruded aluminium coating troughs made to any length, within reason! Easy to use and handle. Spare end caps available as well.

Exposure Equipment Bulbs
We did stock 500w 250v linear quartz camera (do you remember what that was?) lamps, but can get nearly any lamp, UV, Metal Halide, Mercury Vapour, etc. for exposure or curing equipment, usually within 24hrs, often at a better price than the equipment manufacturer

Gauntlet Gloves
Elbow length heavy duty gloves for extra protection when using chemicals and solvents. Also useful for protection when doing other less pleasant jobs!

Masking Films
Amber masking films are available in rolls of widths 1.12 & 1.32 m and in lengths of 7.62 meters

Mesh Brushes
Superior synthetic bristled brushes with generous square head to effectively carry sufficient product to screen. Soft bristles are very effective in all mesh processing operations. Now available coloured to reduce possibility of cross contamination of reagents (as long as operative is not colour-blind)

3M Magic Tape
"Invisible" adhesive tape it’s matt finish means that when used for assembly of possi’s it is much less likely to show on the screen. Available in 12/19/25 mm width rolls of 66m

New Screens
New screens in aluminium or wood, stretched in a mesh of your choice! Rapid turnround, often as quick as 48 hours! Competitive pricing as well!

Screen Drying Cabinets
Horizontal cupboards of a range of sizes, with adjustable racking inside upon which to dry your screens in the optimum temperature and airflow conditions. Available with illuminated tops for layout and spotting out purposes. Expensive on floor space but a really worthwhile investment. A well chosen one will speed up your stencil processes no end, and will soon pay for itself.

Screen Exposure Equipment
We are pleased to be associated with the top manufacturers of screenprinting equipment in the UK. The full range of Coates, Natgraph and Kippax equipment can be supplied. Catalogues of this equipment available on request

Screen Re-Stretching
Your screen frames re-covered to your specification with top quality fabrics. Low Extension fabrics now available. New screen frames also easily available in aluminium or wood. Door to Door collection and delivery service available at minimal cost. Rapid turnaround time often as fast as 48 hours!

Stencil Development Booths
Made with galvanised steel or other chemical resistant materials. Backlit to enable viewing of developing image. Available in a wide range of sizes. Can be supplied as booth alone, or as a complete screen washing facility, with or without vapour extraction facility.

Washout Booths
Made with galvanised steel or other chemical resistant materials, available in a wide range of sizes Can be supplied as booth alone, or as a complete screen washing facility, with or without vapour extraction facility.